Highlights
Type of Charger:MPPT
Controller:DSP
Switching Element:Mosfet/IGBT
Battery Low/Buzzer:Batt. Low Cut +0.2, e.g. 11.2
Battery Low Cut:10-11.7
Battery High Cut (INV.):15-16
Battery Charging Voltage by SPV:SPV Present/SPV CHG. REF. +1V for 15 sec, SPV CHG. REF. +1.5V for 2 sec
Battery Charging Voltage by Grid:SPV Absent/SPV CHG. REF. for 15 sec, SPV CHG. REF. +0.2V for 2 sec
Battery Charging Current by SPV:13-60
Battery Charging Current by Grid:13-60
Grid Cut Voltage (IT Mode/Normal):NA/125-260, 175/210
Grid Low Cut Voltage (IT Mode/Normal):NA/125-200, 260/260
Grid Charging:Enable/Disable
Grid High Cut Voltage:290-300
No Load Shut Down:Enable/Disable
Display:LCD/LED, Display of System Parameters & Faults
Switching Element:Mosfet/IGBT
Nominal Output Voltage:230 (120 for USA)
Output Supply Phase:1 Phase, 3 Wire
Output Waveform:Pure Sine Wave
Output Frequency:50 (60 Optional)
Nominal Current:Varies by Model (e.g., 4.5, 9, …, 54)
Voltage Regulation:±1
Output Voltage Distortion (THD):<3
Output Voltage Varying:230±2%
Overload Capacity (Load Disable):- 110–120%: 60 sec
- 120–150%: 30 sec
- 150–200%: 1 sec